PROJECTS

Install Harley Davidson Horn & Cover-DIY-Motorcycle Podcast



In this free DIY video we show you how to remove and install a horn & cover on a Harley Davidson motorcycle. We did this because we were replacing the stock chrome horn cover with a black one. The Harley horn cover kit we purchased has some of the parts, but you’ll need to salvage a few others from your stock horn cover to complete this project.

GET OUR HARLEY MAINTENANCE OIL CHANGE VIDEO HERE:

IF YOU APPRECIATE THIS FREE VIDEO AND IT HELPS YOU, PLEASE SUPPORT US ON PATREON AND GET BENEFITS:

GET ALL OUR FOR PURCHASE VIDEOS HERE:

CHECK OUT THE LAW ABIDING BIKER STORE HERE:

HERE IS THE EXACT PART WE USED FOR THIS PROJECT:

TO FURTHER SUPPORT US, PLEASE BUY ANY MOTORCYCLE PRODUCTS THROUGH OUR AFFILIATES. NO ADDITIONAL COST TO YOU:

REVZILLA:

J&P Cycles:

MOTORCYCLE SUPERSTORE:

AMAZON:

ADVENTURE HARLEY DAVIDSON:

Video-In this free DIY video we show you how to remove and install a horn & cover on a Harley Davidson motorcycle. We did this because we were replacing the stock chrome horn cover with a black one. The Harley horn cover kit we purchased has some of the parts, but you’ll need to salvage a few others from your stock horn cover to complete this project.

Save yourself a ton of money by not having to take your Harley to the dealership to have these types of projects done. You can do this right in your very own shop or garage and right on the kickstand. Plus, have the absolute satisfaction of wrenching on your own Harley!

source

Tags

Related Articles

12 Comments

  1. Good video…..
    Question, How about a video on a hydraulic clutch that drags when trying to shift into neutral…? I have a 16 Roadglide 103.. I checked the manual and it says the primary takes 38 oz of lube… wow that is a lot.. I put in 28 oz like my old softail and the clutch does not drag when I try to put it in neutral at idle. SO whats up? Is there some sort of adjustment on a hydraulic clutch? The manual does not show any that I have found. It is not like my cable release softail. Any help would be appreciated.

  2. Another blacked out horn cover option is the Arlen Ness round cover that lets you install a timer cover in the center. I used a black screaming eagle timer cover. There is a part number for the hanging bracket for the horn cover you installed and was able to buy it separate from HD.

  3. My acorn nut is seized. When I try to wrench it the whole aluminum bracket starts to twist and the horn cover just twists right into the heat sink on the cylinder at which point i have to stop because the chrome horn cover will mar the heat sink.

    HOW DO I REMOVE THIS DAMN THING!!! LOL

Back to top button
Close